02 JANUARY, 2020

Conley Marine Services, LLC are pleased to offer our complete topside and drydock repair services provided by our facility located on the Harvey Canal, just inside the Harvey Locks.

We provide a complete topside and underwater repair service, machine shop, electrical shop, and road service to accommodate your vessel, barge, or fabrication needs.

Please review some of the following rates and services offered at Conley Marine Services.

Our labor force consists of the following:

INSIDE MACHINIST
FITTERS
ELECTRICIANS
OUTSIDE MACHINIST
LABORERS/RIGGERS
BLASTERS/PAINTERS
WELDERS (CERTIFIED)
VESSEL AUDITORS
VESSEL SURVEYORS
 Yard Services

700st capacity Drydock — $25/ft

*100-ton Crawler Crane — $150/hr

Shorepower connect and disconnect — $225

Shorepower Usage — $5O/day

Remove & Reinstall Wheels — $1500/wheel

Remove & Reinstall Shafts — $1600/shaft

Remove & Reinstall Rudders — $1700/rudder

Remove & Reinstall Tiller Arm (Included in rudder removal) — $850 ea 

Remove & Reinstall Shaft Packing (owner furnished) — $600/shaft

Remove & Reinstall Cutlass Bearing (owner furnished) — $2,100 $475 ea

Remove & Reinstall Pucker Seal Rubbers — $475 ea

Remove & Reinstall Zinc Anode (furnished) — $120 ea 

Remove & Reinstall Zinc Anode (owner furnished) — $65 ea

Engine Alignment — $900

Remove & Reinstall Main Engine/Generator — $5,500

Sandblasting/Painting — $5.50/sq.ft (OF paint)  ($7)     

UT Audio Gauge — $10/shot

Steel Work — Time and Materials           

Steel & Aluminum Fabrication — Time and Materials    

Cut out and Reinstall Rudder Stock — $1750

MACHINE SHOP SERVICES

Machine face of coupling true to shaft — $150/shaft

Check output companion flange on gear — $150

Machine Bushings/Pins (owner furnished material) — $230 ea

Machine New Tailshaft (Two Journal) — $4,500 

Straighten/Machine Worn Tailshaft (Two Journal) — $3,300

Machine New Rudder Stock — $2,100

Straighten/Machine Worn Rudder Stock — $2,100

LABOR RATES (Yard):

All Craft except Electricians/Machinists — $65.00/hr

Electricians, Machinists, other specialties — $75.00/hr

Supervisor — $85/hr

Mileage (Round Trip) — $2.00/mile

SUBCHAPTER M SERVICES

Internal Management or Vessel Audit — $1,250

Internal Vessel Survey / Condition Assessment — $1,500

Additional Sub M Consulting Services — $155/hr


*The crane fee is included in rates for services requiring crane support.

(4) Hour minimum for call out service outside of normal business hours (0700-1530 Monday-Friday)

Overtime rates apply outside normal business hours (0700-1530 Monday-Friday)

Sundays and Holidays shall be considered double time